欢迎您访问青岛亿金来钢膜结构安装修缮工程有限公司 网站!

青岛亿金来钢膜结构

承接各停放,景观 体育看台等膜结构棚

青岛亿金来钢膜结构安装修缮工程有限公司
统一咨询电话:15694496888
当前位置:首页>新闻中心-公司新闻-膜结构看台安装技术的注意事项
膜结构看台安装技术的注意事项
来源:http://www.sdcscp.com/ 发布时间:2022-09-07
对于体育馆里多见到的是膜结构看台,为看台做好了遮挡空间的部分,实用性很大,具备了保护措施。对比膜结构工程的技术上来看,需要注意哪些方面呢?还特讲究了什么呢?小编带大家一起来看看!
What is commonly seen in the gymnasium is the stand membrane structure, which provides shelter for the stands. It is very practical and has protection measures. From the technical point of view of membrane structure engineering, what should be paid attention to? What else did you pay special attention to? Xiaobian, let's take a look!
一:外观设计,在设计的时候需要注意承重力和平衡,一般都是单侧或者是环绕建造的方面上,须有无数个支撑点才能让整个顶子具有强抗风、抗震的功能。可做好了支撑部分。
1: In the appearance design, attention should be paid to the bearing capacity and balance in the design. Generally, it is one side or surrounding construction. There must be countless support points to make the whole roof have strong wind resistance and earthquake resistance. The supporting part can be completed.
二:在施工过程中,需要注意了角度和力度的搭配,以及看现场而定,一般不需要有太多的设计元素,只需要符合体育场馆的要求即可,并且要保证结实耐用,在装饰方面不是重点,看台膜结构使用安全才是重点。
2: In the construction process, we need to pay attention to the matching of angle and strength, and it depends on the site. Generally, we don't need too many design elements, but only need to meet the requirements of stadiums and gymnasiums, and we need to ensure durability. Decoration is not the key, but the use safety of the stand membrane structure is the key.
三:还要在裁剪时量好尺寸,保证材料在焊接过程无任何影响问题,需要做好了结构部分与膜结构膜材裁剪成设计形状部分,可在安装成了看台空间的基本造型。
3: In addition, the size should be measured during cutting to ensure that the materials have no impact during the welding process. It is necessary to cut the structural part and membrane structure membrane materials into the designed shape, which can be installed into the basic shape of the stand space.
膜结构看台
此外膜结构看台在施工时应注意不同部位采用不同规格的夹板并控制好间距,使用夹板将张拉膜结构膜体和索连接。在采用加大截面加固钢构件的时候,对于所选择的截面形式要有利于加固技术要求,还要考虑已经有的缺陷和损伤的状况。
During the construction of this outer membrane structure stand, it should be noted that different parts should use different specifications of splints and control the spacing. The splints should be used to connect the membrane and cable of the tensioned membrane structure. When using enlarged section to reinforce steel members, the selected section form should be conducive to the reinforcement technical requirements, and the existing defects and damages should also be considered.
其次依据张拉膜结构安装部位按顺序进行安装。采用多个节点整体吊装技术,即按照张拉膜结构的膜体设计高度,将膜体按平面位置分块吊装,防止出现晃动现象。
Secondly, install according to the installation position of tension membrane structure. The integral hoisting technology of multiple nodes is adopted, that is, according to the design height of the membrane body of the tensioned membrane structure, the membrane body is hoisted in blocks according to the plane position to prevent shaking.
膜结构看台安装技术是一定以专业的厂家来进行施工,并对这工程规划有固定施工方法,所做好了看台膜结构的要点,并且促进看台膜结构使用寿命更长。更多关于该产品的内容就来咨询我们http://www.sdcscp.com吧!
The membrane structure stand installation technology must be constructed by professional manufacturers, and there are fixed construction methods for this project. The key points of the stand membrane structure are well done, and the service life of the stand membrane structure is promoted to be longer. For more information about this product, please consult us http://www.sdcscp.com Come on!
图标分类中心

Product

联系我们
青岛亿金来钢膜结构安装修缮工程有限公司 青岛亿金来钢膜结构安装修缮工程有限公司

联系电话:15694496888

联系地址:山东省青岛市城阳区前海西社区居委会西100米