欢迎您访问青岛亿金来钢膜结构安装修缮工程有限公司 网站!

青岛亿金来钢膜结构

承接各停放,景观 体育看台等膜结构棚

青岛亿金来钢膜结构安装修缮工程有限公司
统一咨询电话:15694496888
当前位置:首页>新闻中心-公司新闻-膜结构停车棚的粘合方法有几种?
膜结构停车棚的粘合方法有几种?
来源:http://www.sdcscp.com/ 发布时间:2022-05-05
  膜结构停车棚作为保护车辆的屏障得到了很多使用者的认可,所以市场需求量还是可以的,当然时不时地也会出现某些问题需要及时的处理,今天我们来讲讲膜结构停车棚的粘合方法有几种。
  Membrane structure parking shed as a barrier to protect vehicles has been recognized by many users, so the market demand is still ok, of course, from time to time there will be some problems need to be dealt with in time, today we will talk about membrane structure parking shed adhesion methods have several.
  缝纫粘合:这是一种结实的粘合办法,可是缝纫线简略被损坏。缝纫粘合通常是与热合粘合一起使用在PVC涂覆聚酯长丝织物上,以期得到更大的强度,假如在户外运用,缝纫粘合还要用PVC掩盖物加以保护。缝纫粘合不适用于PTFE涂覆玻璃纤维织物,和其它一切脆性布基的资料。
  Sewing bonding: This is a strong bonding method, but the sewing thread is briefly damaged. Sewing bonding is usually used with thermal bonding on PVC coated polyester filament fabric, in order to get greater strength, if used outdoors, sewing bonding should be protected with PVC cover. Sewing bonding does not apply to PTFE coated glass fiber fabric, and all other brittle fabric data.
  热合粘合:热焊接是加热粘合缝,并使织物上层的涂层熔融,然后施加压力并使粘合缝冷却。能够经过向膜材吹热空气,或许让膜材触摸加热物件,或许经过高频电磁波,使得膜材取得相应的热量。热和粘合运用于PVC涂覆聚酯长丝织物和PTFE涂覆玻璃纤维织物。而关于PTFE涂覆玻璃纤维织物来说,因为PTFE不能自己热熔,就需要在内层选用一种不一样的资料。
  Thermal bonding: Thermal welding heats the bonding seam and melts the coating on top of the fabric, then applies pressure and cools the bonding seam. Can blow hot air to the membrane material, perhaps let the membrane material touch heating objects, perhaps after high-frequency electromagnetic waves, so that the membrane material to obtain the corresponding heat. Heat and bonding are applied to PVC coated polyester filament fabric and PTFE coated glass fiber fabric. As for PTFE coated glass fiber fabric, because PTFE can not melt itself, it is necessary to choose a different material for the inner layer.
  机械粘合:尽管缝纫和热合已经大量使用于膜材加工车间,可是机械粘合有时也会使用。机械粘合通常有三种形式:在两个膜片的边际埋绳,并在两个膜片的重叠方位夹上夹板。这种夹板请求不接连,而且能够移动。
  Mechanical bonding: Although sewing and thermal bonding are widely used in film workshops, mechanical bonding is sometimes used. Mechanical bonding usually takes three forms: a rope is buried at the edge of the two diaphragms and a splint is clamped at the overlapping position of the two diaphragms. This splint request is not connected, and can be moved.
  在两个膜片的边际埋绳,并将两条埋绳嵌入有两个开口的(象横放着的哑铃)铝夹板中。铝夹板也是不接连的。这种粘合办法的防水性能比第一种要差。简略的一种办法是将许多膜片排成一排并加以固定。这是简略且迅速地安装办法,但不能做到防水。
  Bury the ropes at the edge of the two diaphragms and insert the two embedding ropes into an aluminum splint with two openings (like a dumbbell laid horizontally). Aluminum splints are also not connected. The waterproof performance of this adhesive method is worse than the first one. A simple method is to line up a number of diaphragms and hold them in place. This is a simple and rapid installation method, but can not do waterproof.
  膜结构停车棚的粘合方法有几种?三种,分别是缝纫粘合、热合粘合以及机械粘合,当然粘合过程也不一定是顺顺利利的,这就要求操作人员提前做好预防工作了,更多内容您可以来网站www.sdcscp.com看看。
  How many adhesion methods are there for membrane structure parking shed? Three, are sewing bonding, thermal bonding and mechanical bonding, of course, the bonding process is not necessarily smooth, which requires operators to do preventive work in advance, more content you can come to the website www.sdcscp.com to see.
图标分类中心

Product

联系我们
青岛亿金来钢膜结构安装修缮工程有限公司 青岛亿金来钢膜结构安装修缮工程有限公司

联系电话:15694496888

联系地址:山东省青岛市城阳区前海西社区居委会西100米